Polyurethane sports floors

concrete and resin flooring
additives and cement base products

Social Networks

Phone

RESIN FLOOR COATINGS

PU.SPF

Polyurethane sports floors

Polyurethane sports flooring is a type of integrated, flexible and workable flooring with a thickness of about 5 to 10 mm, which is suitable for sports venues. This flooring has a high resistance to impact, abrasion and UV rays, and due to its flexibility, it reduces the possibility of injuries to athletes.

What is RESIN FLOOR COATING?

Sports polyurethane flooring is a type of artificial flooring that consists of polyurethane resin and hardener. These floorings are very suitable for use in sports fields due to their unique properties, including resistance to impact, abrasion, and slippage.

Sports polyurethane flooring requires relatively little maintenance. These floors can be cleaned using a vacuum or vacuum cleaner and a mild detergent solution.

Polyurethane sports flooring is suitable for use in a wide variety of sports, including basketball, volleyball, tennis, and soccer. These floors are also suitable for use in gyms, swimming pools, and other sports environments.

The implementation of sports polyurethane flooring should be done by an expert. These floors are usually applied in two layers: a bottom layer and a top layer. The bottom layer is used to create a smooth and even surface for the top layer. The top layer determines the color and design of the flooring.

Sports polyurethane flooring requires relatively little maintenance. These floors can be cleaned using a vacuum or vacuum cleaner and a mild detergent solution.

Polyurethane sports floors

Compounds

Two-component product based on flexible polyurethane resin

Advantages

Being a shock absorber and preventing damage to the bones and joints of athletes
High resistance to wear, tear and cracking
Resistance to different weather conditions such as heat, cold, sunlight and humidity
It has antibacterial properties and prevents the growth of fungi and bacteria
Washable and easy to maintain
It has a variety of colors and designs and can be painted on the surface
It has acoustic properties and noise reduction
Easy to repair
Renovating the surface by applying a final layer

Application

Sports hall flooring
Open playground flooring

Technical Specifications

Appearance of components: liquid
Color: according to color resin
Suitable thickness: 2 to 10 mm
Composition density: 1280 Kg/cm ± 0.5%³
Adhesion resistance to the substrate: 3 MPa (after 3 days )
Pot life: about 30 minutes (according to the ambient temperature )
Amount of composition of components A, B: A 4 kg, B 1 kg
Suitable temperature for mixing: between +23 and +30 degrees Celsius
Initial hardening: 12 hours
Final hardening: 7 days

Implementation tips

Do not run on a wet surface
No implementation on bitumen and asphalt
Do not dilute with any solvent

Preparation of the substrate

The contact surface must be clean and free of any grease, dust and loose areas.
The substrate must be dry so that there is no obstacle to sticking to the substrate.
The surface and contact surface with the base plate must be clean and healthy. For best results, the substrate should be dry.
After combining the components with each other, proceed to implement it immediately.